M16 gun accessories & shooting supplies

AR15

A. Origins. The AR15 Rifle was designed by Eugene Stoner and his team of engineers in the 1960 s for entry into U.S. military trials for a new battle rifle to replace the M-14. Mr. Stoner, working at the time for ArmaLite (a division of the Fairchild Aircraft & Engine Corporation), engineered a revolutionary new rifle utilizing non-traditional rifle materials such as aluminum alloys and plastics. It was initially designed around the .222 Remington cartridge. It was later, at the request of the Army, re-chambered in .223 Remington (5.56×45mm) which propelled a 55-grain bullet out of the AR15 at roughly 3000 ft.-plus per second. With the .223-calibered AR15 sight rifle, for the same weight, a soldier could carry more ammunition than the older .308 Win (7.62×51mm) ammunition for the heavier M-14 rifle.

After lengthy evaluation and revisions, the AR15 rifle was only adopted by the U.S. Air Force for use by its base security personnel. For a variety of political reasons, the Army did not select the rifle. However, as America became involved in the Vietnam War, Secretary of Defense James McNamara cut through the Army Ordnance Department s red tape and selected the AR15 for issuance to troops. The Army gave it the military designation of “M16″.

In the Vietnam War, the rifle initially earned a reputation as being prone to jamming and stoppages. This was, in hindsight, due to three primary factors: 1) insufficient training of the troops on weapons maintenance, 2) poor-to-non-existent distribution of cleaning kits to those same troops in the field, and 3) improperly formulated .223 Remington ammunition which caused heavy fouling (a primary cause of stoppages). Eventually, the situation was recognized and remedied as troops were properly trained to keep their weapons clean and well-lubricated, issued proper cleaning kits, and issued .223 Remington ammunition that was properly formulated to burn cleanly.

B. The AR15 Legacy. Today, the AR15 rifle has become really one the most highly engineered and refined battle rifles of modern armies. It has since earned a reputation for reliability and accuracy. It has been in service in all branches of U.S. Armed Forces now for nearly 30 years. In the process, it has been upgraded from the “M16“, to the “M16-A1″, all the way through the latest “M16-A4″. The U.S. Marine Corps (USMC) and the U.S. Military Special Operations Command (SOCOM) also currently issues to its troops, the M-4 rifle, which is essentially an M-16 with a 14.5″ barrel, collapsible stock, detachable carrying handle, and other special accessories such as laser/infrared sighting systems, reflex-type optics, grenade launchers, flashlight attachments, etc. For these Special Forces, the M-4 has also been in certain instances reconfigured to fire “full auto”, as opposed to “tri-burst”.

The current generation of military M-16 s and civilian AR15 accessories models differ from the originals in many ways, reflecting the improvements and refinements of the rifle over the last 30 years. Current Military Specifications (Mil-Spec) for the rifle s barrel is for a heavy barrel (HBAR), replacing the original lightweight barrel which was prone to overheating and bending. Nearly all current civilian AR15 sights now are built with Mil-Spec HBAR s. The original triangular-shaped, non-perforated handguards have been replaced by rounded, perforated, and heat-shielded handguards for rapid heat dissipation of the barrel. Other changes include; a tri-burst sear on the M-16 replacing the fully automatic sear of the original, adding a brass deflector to keep spent cartridges out of left-handed shooters faces, adjustable front sight and fully adjustable rear sight for windage and elevation, detachable carrying handles, etc.

Today s military contract for the M-16 variants has been awarded to Fabrique Nationale d Armes de Guerres (FN) of Belgium (though the actual rifles are built here in the United States). Colt s Manufacturing s Co., which lost the lucrative M-16 contract, has retained the smaller contract for the M-4 rifle mentioned above. It has been reported that prior to Colt s obtaining the M-4 contract, Bushmaster Firearms Co. had manufactured a limited run of M-4 s. (Note: According to recent firearms industry news, as of December 1997, Colt is currently in the process of acquiring FN.)

C. What s in a Name? The name, “AR15“, in general is used by the shooting public in reference to all current rifles (regardless of manufacturer) made to look, function, and swap-parts with the AR15. Non-military contract AR15 s are also commonly referred to as “clones”. The actual and original “AR15“, manufactured by ArmaLite and then Colt (after buying the manufacturing rights from ArmaLite) has been discontinued for political reasons. Each manufacturer of AR15-patterned rifles now has its own moniker for the rifle these days; like Colt s “Match Target”, Bushmaster s “XM15E2″, DPMS s “Panther”, and the hilarious Olympic Arms “PCR” for “Politically Correct Rifle”.

-

Mounting Solutions Plus (MSP) Links, shooting supplies
Mounting Solutions Plus, a distributor of A.R.M.S., PRI Mounts (Precision Reflex), AIPMPOINT and … shooting supplies 3 Big Boy Gun Toys - Shooting Accessories. Big Boy Gun Toys - shooting …

$$$ I BUY GOLD$$$
All karat gold jewelry like rings, charms, bracelets, chain, pendants, watches, dental gold crowns, inlays, bridges, dental lab scrap, gold coins and bars, jewelers and goldsmiths bench sweeps, gold casting splatter,excess gold jewelry inventory, unwanted or broken gold jewelry, gold nuggets, gold wire and sizing stock,gold filings clippings and shavings, all precious metals containing gold, silver and platinum…..Call 714-220-7327

Mounting Solutions Plus (MSP): Store Map
WEIGAND: Taurus Scope Mount for M44, Raging Bull .454 Casull manufactured after 1/1/01- Silver: WEIGAND: Taurus Scope Mount for M44, Raging Bull .454 Casull manufactured after 1/1/01- Black

All Masonry
Brick, Block, Concrete, Fences, Repairs, Add-ons, Fireplaces, barbeques, chimeneya's, Pool pump walls, pavers, and mailboxes. 30+ years exp. Free estimates. Customer satisfaction is our number one priority.

$20, Wanted - Small dog Kennel
Need small dog kennel.

MISC ITEMS TO TRADE/SELL
I AM IN NEED OF…. 1- TRAMPOLINE (14'MIN.) 2- ELECTRIC DRYER 3- HOT TUB 4- GENERAL HOMEIMPROVEMENT 5- LANSCAPING VEGETATION/LABOR

Rifle Scopes

Telescopic rifle scopes sights are classified in terms of the optical magnification and the objective lens diameter, e.g. 10 50. This would denote 10 times magnification with a 50 mm objective lens. In general terms, larger objective lens diameters are better (collect more light and give a wider field of view), the magnification power should be chosen on the basis of the intended use. There are also Adjustable Objectives sights where the magnification can be changed by manually turning one part, the syntax is the following: minimal magnification maximum magnification objective lens, for example, 3 9 40.

Telescopic rifle scopes sights come with a variety of different reticles, ranging from the traditional crosshairs to complex reticles designed to allow the shooter to estimate accurately the range to a target, to compensate for the bullet drop, and to compensate for the windage required due to crosswinds. Perhaps most flexible is the “mil-dot” reticle, which consists of duplex crosshairs with small dots at milliradian intervals in the field of view. (A milli-radian equates to 3.43775 MOA, that is, approximately 21.6 inches at 600 yards; each MOA equates to 1.0472″ at 100 yards, often rounded to 1″ at 100 yards for fast mental calculations.) A trained user can estimate the range to objects of known size, the size of objects at known distances, and even compensate for both bullet drop and wind drifts at known ranges with a reticle-equipped rifle scope.

For example, with a typical Leupold “rifle scope” brand duplex 16 MOA reticle (of a type as shown in image B) on a fixed power scope, the distance from post to post (that is, between the heavy lines of the reticle spanning the center of the scope picture) is approximately 32 inches at 200 yards, or, equivalently, approximately 16 inches from the center to any post at 200 yards. With a known target of a diameter of 16 inches that fills just half the distance from scope center to post, the distance to target is approximately 400 yards. With a known target of a diameter of 16 inches that fills the entire sight picture from post to post, the range is approximately 100 yards. Other ranges can be similarly estimated accurately in an analog fashion for known target sizes through proportionality calculations. Holdover, for estimating vertical point of aim offset required for bullet drop compensation on level terrain, and horizontal windage offset (for estimating side to side point of aim offsets required for wind effect corrections) can similarly be compensated for through using approximations based on the wind speed (from observing flags or other objects) by a trained user through using the reticle marks. The less-commonly used holdunder, used for shooting on sloping terrain, can even be estimated by an appropriately-skilled user with a reticle-equipped scope, once the slope of the terrain and the slant range to target are both known.

-

Courses and Instruction
Courses and Instruction. At some point, a survivor is likely going to need the benefit of training courses and good instruction in order to make progress in shooting skills. … LASERS AND BINOCULARS SCOPES, SIGHTS, AND WEAPON LIGHTS TACTICAL … training in shooting fundamentals is mostly universal, but the competence … the military, a police academy or the NRA …

Lacrosse

Lacrosse is a fast-paced team sport played by ten players (men) or twelve players (women), each of whom uses a netted stick (called the crosse) in order to pass and catch a very hard rubber ball with the aim of scoring goals, each worth one point, by propelling the ball into the opponent’s goal. The team scoring the most points after four quarters, and overtime if necessary, wins. In NCAA men’s lacrosse Video , the quarters are 15 minutes. In most high school lacrosse fan, quarters are 12 minutes long. In youth leagues, quarters are usually 8 minutes long.[1]. Under international rules, quarters are 20 minutes.[2] In NCAA women’s lacrosse, two 25 minute halves are played. Women’s high school games consist of two 25 minute halves.[3]

Popular mostly in North America, Lacrosse is one of the continent’s oldest sports and the fastest growing sport at all levels youth, high school, college, and professional. Lacrosse is especially popular in the northeastern part of the US and is Canada’s national summer sport (although Canadians commonly play the box lacrosse variety of the game which is described below). It is expanding westward, with burgeoning lacrosse communities in Missouri, Illinois, Colorado, California, Oregon, Florida, Tennessee, Texas, and Minnesota.

In its modern form, men’s lacrosse is played on a field of grass or artificial turf. Each team is composed of three attackmen, three midfielders, three defensemen, and one goaltender. In men’s lacrosse, players wear protective equipment on their heads, shoulders, arms, and hands, as body-checking is an integral part of the game. Women’s lacrosse is played in a similar manner except with two additional midfielders per team. Players of women’s lacrosse need only wear protective eyewear (except for the Jem Adams , who wears the same protective equipment as a men’s goaltender [helmet, throat guard, chest protector, etc.]), as contact is not permitted apart from minor stick-checks.

The sport was invented by Native North Americans. Its name was dehuntshigwa’es in Onondaga (”men hit a rounded object”), da-nah-wah’uwsdi in Eastern Cherokee (”little war”), Tewaarathon in Mohawk language (”little brother of war”), and baaga’adowe in Ojibwe (”Lacrosse“). The game was named lacrosse by early French Kyle Harrison . It is commonly assumed that the name stems from the French term “crosse”, for the shepherd’s crooklike crosier carried by bishops as a symbol of office. Pieffe Francois Xavier de Charlevoix noted the resemblance between the crosier and the shape of the racket stick in 1719. However, the term crosse, which also translates as bat, was applied to the Native playing stick by the Jesuit fathers nearly a century before. Since there was only one ball, early players concentrated on first injuring their opponents with their sticks, and then moving easily to the goal. Their pitch was about one kilometre by one kilometre. Games sometimes lasted for days, and often players were gravely injured or even killed. Early balls were made out of the heads of the enemy, deerskin, clay, stone, and sometimes wood. Lacrosse has played a significant role in the community and religious life of tribes across the continent for many years. Early lacrosse video was characterized by deep spiritual involvement, befitting the spirit of combat in which it was undertaken. Those who took part did so in the role of warriors, with the goal of bringing glory and honor to themselves and their tribes, and as a religious ritual[4]. The game was said to be played “for the pleasure of Kyle Harrison.”

-

Gun Ammunition Reloading, Gun Ammunition Reloading information
… Ammunition Archery Barrels & Choke … & Batteries Grips Pads Stocks Gun … Mounting Solutions Plus (MSP) Links, shooting supplies … _of_honor/mohkor2.htm. Aimpoint compm2 red dot sight …

Camouflage

Smaller, irregular units of scouts in the 18th century were the first to adopt colors in drab shades of brown and green. Major armies retained their color until convinced otherwise. The British in India in 1857 were forced by casualties to dye their red tunics to neutral tones, initially a muddy tan called khaki (from the Urdu word for ‘dusty’). This was only a temporary measure. It became standard in Indian service in the 1880s, but it was not until the Second Boer War that, in 1902, the uniforms of the entire British army were standardised on this dun tone for battledress.

The United States was quick to follow the British, going khaki in the same year. Russia followed, partially, in 1908. The Italian army used grigio-verde (”grey-green”) in the Alps from 1906 and across the army from 1909. The Germans adopted feldgrau (”field grey”) in 1910.

Other armies retained brighter colors. At the beginning of World War I the French experienced heavy losses because the troops wore red (garance) trousers as part of their uniform. This was changed in early 1915, partly due to casualties and partly because the red dye was manufactured in Germany. The French army also adopted a new “horizon blue” jacket. The Belgian army started using khaki uniforms in 1915.

The Bronze Horseman camouflaged from the German aircraft during the Siege of Leningrad (August 8, 1941).The French also established a Section de Camouflage (Camouflage Department) in 1915, briefly headed by Eugene Corbin and then by Lucien-Victor Guirand de Sc vola. The camouflage experts were, for the most part, painters, sculptors, theatre set artists and such. Technological constraints meant that patterned camouflage uniforms were not mass manufactured during WW I. Each patterned uniform was hand-painted, and so restricted to snipers, forward artillery observers, and other exposed individuals. More effort was put into concealing larger pieces of equipment and important structures. By mid-1915 the French section had four workshops - one in Paris and three nearer the front - mainly producing camouflage netting and painted canvas. Netting quickly moved from wire and fabric to use raffia, hessian, and cocoa - the integration of natural materials was always recommended.

Units of Camouflage who were artists, designers, or architects in civilian life were also largely used by the forces of the United Kingdom (Camouflage Section established in late 1916 based at Wimereux) and the US (New York Camouflage Society established in April 1917, official Company A, 40th Engineers set up in January 1918 and the Women’s Reserve Camouflage Corps) and to a lesser extent by Germany (from 1917, see, for example, Lozenge - possibly the earliest printed camouflage), Italy (Laboratorio di mascheramento established in 1917), Belgium and Russia. The word camouflage first entered the English language in 1917.

Camouflage added to helmets was unofficially popular, but these were not mass-produced until the Germans began in 1916 to issue stahlhelme (steel helmets) in green, brown, or ochre. Mass-produced patterned, reversible, cloth covers were also issued shortly before the end of the war, although hand-made examples were in use from late 1914. Net covering was also examined, either fitted with natural vegetation or with colored fabric strips called scrim.

Specialist troops, notably snipers, could be supplied with various items of camouflage, including patterned veils for the head and gun, hand-painted overalls and scrim covered netting or sacking - an adaptation of the rag camouflage used in Scotland by anti-poaching wardens, gillies, the first ghillie suits.

Two HMMWVs, one in desert “camouflage”, one in woodland.The first mass produced military camouflage material was the Italian telo mimetico (”mimetic cloth”) pattern of 1929, used to cover a shelter-half (telo tenda), an idea copied by the Germans in 1931. With mass-production of patterned fabrics possible, they became far more common on individual soldiers in WW II. Initially patterning was uncommon, a sign of elite units, to the extent that captured camouflage uniforms would be often ‘recycled’ by an enemy. The Red Army issued “amoeba” disruptive pattern suits to snipers from 1937 and all-white ZMK top-garments the following year, but it was not until hostilities began that more patterns were used.

The Germans had experimented before the war and some army units used “splinter” pattern camouflage. Waffen-SS combat units experimented with various patterns, including palmenmuster (”palm pattern”), sumpfmuster (”swamp pattern”), erbsenmuster (”pea pattern”), and also telo mimetico (”mimetic cloth”) using fabric seized from the Italians in 1943 - the Leibstandarte SS Adolf Hitler division often wore this pattern.

The British did not use disruptive-pattern uniforms until 1942, with the hand-painted Denison smock for paratroopers, followed in 1943 with a similar style M42 garment.

A Royal Norwegian Navy craft, in a splinter camouflage pattern.The US Corps of Engineers began wide-ranging experiments in 1940, but little official notice was taken until 1942 when General MacArthur demanded 150,000 jungle camouflage uniforms. A 1940 design, dubbed “frog-skin”, was chosen and issued as a reversible beach/jungle coverall - soon changed to a two-part jacket and trousers. It was first issued to the US Marines fighting on the Solomon Islands. Battle-field experience showed that pattern was unsuitable for moving troops and production was halted in 1944 with a return to standard single-tone uniforms.

With the return of war camouflage sections were revived. The British set up the (camouflage) Development and Training Centre in 1940 at Farnham Castle, Surrey. Early staff included artists from the Industrial Camouflage Research Unit such as Roland Penrose and Frederick Gore, and the stage magician Jasper Maskelyne (later famous for his camouflage work in the North African campaign).

From 1978 to the early 1980s, the American 2d Armored Cavalry Regiment stationed in Europe used a digital camouflage pattern on its vehicles. During 1979 and 1980 the Australian Army experimented with digital camouflage on helicopters. More recently, battledress in digital camouflage patterns has been adopted by the Canadian Army and Air Force (CADPAT), the United States Marine Corps (MARPAT), and much of the military of Jordan.

-

The best Ar 15 accessories Online
Comp, Eotech, HARRIS BIPOD, FLASHLIGHTS, Glow Sticks for the AR - 15 , M16, Ruger 10/22 AR - 15 Accessories By eliminating this play, AccuWedge reduces noise MSP,distributor of ARMS, SAMSON, PRI Mounts

gun_supplies2’s Journal
grips4guns.com Contact Us page to Mounting Solutions Plus (MSP) MSP,distributor of ARMS, SAMSON VISION - ruger 10/22 magazine - HARRIS BIPOD - RIFLE SLINGS- Scope Mounts - Smith & Wesson - AR-15 - AR

pleasingbetty.com
Rockmount Bipod. Rock Music Buttons. Rock Ola 1426 Parts Rolf Harris Ghost Town In The Gums. Rolf Sestriere Campy Samson And Delilah 1949. Samsonite Agenda. Samsonite Extra Large

www.contrib.andrew.cmu.edu
aaa/s. aah/v. aal/s. aar. aas. aau. aba/s. abc/s. abe/s. abi. abm. abs. abu. acc. ac/w. ach. ack. acm. acr. acs. act/v. acu. ada/s. add/v. ade/s. adj. adm. ado/s. ads. adu. adv. adz. aea. aec. aef

Aimpoint Scope Mounts
Scopes, Surefire flashlights, Red dot Sights, fiber optic sight, Aimpoint Comp, Eotech, HARRIS BIPOD Samson Manufacturing: AIMPOINT MOUNTS. Scope Mounts & Rails AIMPOINT MOUNTS Aimpoint 3X Mounts 30mm

acopalypse
de la paja rosada nyc OR new-york-city health code Peter Harris at interior rooms }}}}}genetica pseudomonas armalite ar-50 bipod carrosserie automobile street fighter 2010 final fight samson inox

Aimpoint
Scopes, Surefire flashlights, Red dot Sights, fiber optic sight, Aimpoint Comp, Eotech, HARRIS BIPOD Samson Manufacturing: Aimpoint 3X Mounts. Quick Flip? Right for Aimpoint 3X Magnifier Mount Code:

valkyrie profile gameshark codes
rail bipod. yamaha phazer motorcycles. Veh : icle samson and delilah pictures. mickeymouse virtual. cunnilictus harris act drugs. recipe grilled corn on cob. falcon 1960

AR15

A. Origins. The AR15 Rifle was designed by Eugene Stoner and his team of engineers in the 1960 s for entry into U.S. military trials for a new battle rifle to replace the M-14. Mr. Stoner, working at the time for ArmaLite (a division of the Fairchild Aircraft & Engine Corporation), engineered a revolutionary new rifle utilizing non-traditional rifle materials such as aluminum alloys and plastics. It was initially designed around the .222 Remington cartridge. It was later, at the request of the Army, re-chambered in .223 Remington (5.56×45mm) which propelled a 55-grain bullet out of the AR15 at roughly 3000 ft.-plus per second. With the .223-calibered AR15 sight rifle, for the same weight, a soldier could carry more ammunition than the older .308 Win (7.62×51mm) ammunition for the heavier M-14 rifle.

After lengthy evaluation and revisions, the AR15 rifle was only adopted by the U.S. Air Force for use by its base security personnel. For a variety of political reasons, the Army did not select the rifle. However, as America became involved in the Vietnam War, Secretary of Defense James McNamara cut through the Army Ordnance Department s red tape and selected the AR15 for issuance to troops. The Army gave it the military designation of “M16″.

In the Vietnam War, the rifle initially earned a reputation as being prone to jamming and stoppages. This was, in hindsight, due to three primary factors: 1) insufficient training of the troops on weapons maintenance, 2) poor-to-non-existent distribution of cleaning kits to those same troops in the field, and 3) improperly formulated .223 Remington ammunition which caused heavy fouling (a primary cause of stoppages). Eventually, the situation was recognized and remedied as troops were properly trained to keep their weapons clean and well-lubricated, issued proper cleaning kits, and issued .223 Remington ammunition that was properly formulated to burn cleanly.

B. The AR15 Legacy. Today, the AR15 rifle has become really one the most highly engineered and refined battle rifles of modern armies. It has since earned a reputation for reliability and accuracy. It has been in service in all branches of U.S. Armed Forces now for nearly 30 years. In the process, it has been upgraded from the “M16“, to the “M16-A1″, all the way through the latest “M16-A4″. The U.S. Marine Corps (USMC) and the U.S. Military Special Operations Command (SOCOM) also currently issues to its troops, the M-4 rifle, which is essentially an M-16 with a 14.5″ barrel, collapsible stock, detachable carrying handle, and other special accessories such as laser/infrared sighting systems, reflex-type optics, grenade launchers, flashlight attachments, etc. For these Special Forces, the M-4 has also been in certain instances reconfigured to fire “full auto”, as opposed to “tri-burst”.

The current generation of military M-16 s and civilian AR15 accessories models differ from the originals in many ways, reflecting the improvements and refinements of the rifle over the last 30 years. Current Military Specifications (Mil-Spec) for the rifle s barrel is for a heavy barrel (HBAR), replacing the original lightweight barrel which was prone to overheating and bending. Nearly all current civilian AR15 sights now are built with Mil-Spec HBAR s. The original triangular-shaped, non-perforated handguards have been replaced by rounded, perforated, and heat-shielded handguards for rapid heat dissipation of the barrel. Other changes include; a tri-burst sear on the M-16 replacing the fully automatic sear of the original, adding a brass deflector to keep spent cartridges out of left-handed shooters faces, adjustable front sight and fully adjustable rear sight for windage and elevation, detachable carrying handles, etc.

Today s military contract for the M-16 variants has been awarded to Fabrique Nationale d Armes de Guerres (FN) of Belgium (though the actual rifles are built here in the United States). Colt s Manufacturing s Co., which lost the lucrative M-16 contract, has retained the smaller contract for the M-4 rifle mentioned above. It has been reported that prior to Colt s obtaining the M-4 contract, Bushmaster Firearms Co. had manufactured a limited run of M-4 s. (Note: According to recent firearms industry news, as of December 1997, Colt is currently in the process of acquiring FN.)

C. What s in a Name? The name, “AR15“, in general is used by the shooting public in reference to all current rifles (regardless of manufacturer) made to look, function, and swap-parts with the AR15. Non-military contract AR15 s are also commonly referred to as “clones”. The actual and original “AR15“, manufactured by ArmaLite and then Colt (after buying the manufacturing rights from ArmaLite) has been discontinued for political reasons. Each manufacturer of AR15-patterned rifles now has its own moniker for the rifle these days; like Colt s “Match Target”, Bushmaster s “XM15E2″, DPMS s “Panther”, and the hilarious Olympic Arms “PCR” for “Politically Correct Rifle”.

-

TriTECH TACTICAL SLING for AR-15 (M16 A2) UNDER MOUNT, LEFT HAND BLACK - Shooting Supplies
TACTICAL RAPID ASSAULT SLING TRAS™ AR/15 CAR (M16 A2) The Tactical Rapid Assault Sling (TRAS_ ) was designed by Richard (”Rick”) A. Garcia, Sr. in 1996 to supply the Military and the … SLING for AR-15 (M16 A2) UNDER MOUNT, LEFT HAND BLACK. MSP Code: TA2-UMS-LHB. Price: Surefire Price @ MSP. TACTICAL RAPID ASSAULT SLING TRAS …

Product Data Sheet (PDF)
… Amp Form C relays to an M2, M8, M16 or MSP-8R. May not be installed in an … internally in the M1, M2, M8, M16 or MSP for remote site …

ruger10_22’s Journal
… under the designation M16. Colt continued to use the AR-15 trademark for its … Ghillie Suits - Mounting Solutions Plus (MSP) Mounting Solutions Plus (MSP …

Light Reading - Mellanox Shows IB Switch Design - Telecom News Wire
… The InfiniScale MTEK43132-M16 is based on a Constant Bi-Sectional Bandwidth (CBB) or fat tree … download our free white paper. MSP Platform for VARs, Integrators and Consultants …

AR-15: pistol grips -EOTECH MOUNTS
… MSP) is a distributor of Shooting Supplies and Gun Accessories for the discriminating shooter in the varmint, competition and tactical disciplines for the AR-15 / M16 … PRI M16 AR15 …

Wilkerson Operations - Technical Support
… SIZE 2. A18. MSP-96-647. Type B 0.5 Micron … Type C 0.01 Micron. M16-XX-SXX. MSP-95-988 …

Mounting Solutions Plus, Scope Mounts & Rings: AR-15 / M16, AR15
… Search MSP: Not sure what scope mount you need … Supplies for the AR-15 / M16, MP5, Ruger 10/22 & Other Firearms. Mounting Solutions Plus (MSP) is a distributor of A.R.M. …

BLACK RIFLE II - The M16 Into the 21st Century (NEW): Mounting Solutions Plus (MSP)
… its early days, the M16 has gone on to become … Even more astonishingly, the M16 today is at the center … all based on the M16 platform , which thereby grows more …

M16 PARTS 80
… Todays Top Stories. M16 PARTS 80. Sponsored Results … Mounting Solutions Plus (MSP) is a distributor of high quality shooting products for the discriminating shooter in the …

Ak-47 - Mazda Forums
… I prefer the M16-A2 or the 7.62×51mm version of the M16 made by … Proteg (MSProtege.com) MSP Lounge + Welcome area MSP Appearance MSP Forced Induction MSP Engine & Performance …

AR-15

A. Origins. The AR-15 Rifle was designed by Eugene Stoner and his team of engineers in the 1960 s for entry into U.S. military trials for a new battle rifle to replace the M-14. Mr. Stoner, working at the time for ArmaLite (a division of the Fairchild Aircraft & Engine Corporation), engineered a revolutionary new rifle utilizing non-traditional rifle materials such as aluminum alloys and plastics. It was initially designed around the .222 Remington cartridge. It was later, at the request of the Army, re-chambered in .223 Remington (5.56×45mm) which propelled a 55-grain bullet out of the AR-15 at roughly 3000 ft.-plus per second. With the .223-calibered AR-15 sight rifle, for the same weight, a soldier could carry more ammunition than the older .308 Win (7.62×51mm) ammunition for the heavier M-14 rifle.

After lengthy evaluation and revisions, the AR-15 rifle was only adopted by the U.S. Air Force for use by its base security personnel. For a variety of political reasons, the Army did not select the rifle. However, as America became involved in the Vietnam War, Secretary of Defense James McNamara cut through the Army Ordnance Department s red tape and selected the AR-15 for issuance to troops. The Army gave it the military designation of “M16″.

In the Vietnam War, the rifle initially earned a reputation as being prone to jamming and stoppages. This was, in hindsight, due to three primary factors: 1) insufficient training of the troops on weapons maintenance, 2) poor-to-non-existent distribution of cleaning kits to those same troops in the field, and 3) improperly formulated .223 Remington ammunition which caused heavy fouling (a primary cause of stoppages). Eventually, the situation was recognized and remedied as troops were properly trained to keep their weapons clean and well-lubricated, issued proper cleaning kits, and issued .223 Remington ammunition that was properly formulated to burn cleanly.

B. The AR-15 Legacy. Today, the AR-15 rifle has become really one the most highly engineered and refined battle rifles of modern armies. It has since earned a reputation for reliability and accuracy. It has been in service in all branches of U.S. Armed Forces now for nearly 30 years. In the process, it has been upgraded from the “M16“, to the “M16-A1″, all the way through the latest “M16-A4″. The U.S. Marine Corps (USMC) and the U.S. Military Special Operations Command (SOCOM) also currently issues to its troops, the M-4 rifle, which is essentially an M-16 with a 14.5″ barrel, collapsible stock, detachable carrying handle, and other special accessories such as laser/infrared sighting systems, reflex-type optics, grenade launchers, flashlight attachments, etc. For these Special Forces, the M-4 has also been in certain instances reconfigured to fire “full auto”, as opposed to “tri-burst”.

The current generation of military M-16 s and civilian AR-15 accessories models differ from the originals in many ways, reflecting the improvements and refinements of the rifle over the last 30 years. Current Military Specifications (Mil-Spec) for the rifle s barrel is for a heavy barrel (HBAR), replacing the original lightweight barrel which was prone to overheating and bending. Nearly all current civilian AR-15 sights now are built with Mil-Spec HBAR s. The original triangular-shaped, non-perforated handguards have been replaced by rounded, perforated, and heat-shielded handguards for rapid heat dissipation of the barrel. Other changes include; a tri-burst sear on the M-16 replacing the fully automatic sear of the original, adding a brass deflector to keep spent cartridges out of left-handed shooters faces, adjustable front sight and fully adjustable rear sight for windage and elevation, detachable carrying handles, etc.

Today s military contract for the M-16 variants has been awarded to Fabrique Nationale d Armes de Guerres (FN) of Belgium (though the actual rifles are built here in the United States). Colt s Manufacturing s Co., which lost the lucrative M-16 contract, has retained the smaller contract for the M-4 rifle mentioned above. It has been reported that prior to Colt s obtaining the M-4 contract, Bushmaster Firearms Co. had manufactured a limited run of M-4 s. (Note: According to recent firearms industry news, as of December 1997, Colt is currently in the process of acquiring FN.)

C. What s in a Name? The name, “AR-15“, in general is used by the shooting public in reference to all current rifles (regardless of manufacturer) made to look, function, and swap-parts with the AR-15. Non-military contract AR-15 s are also commonly referred to as “clones”. The actual and original “AR-15“, manufactured by ArmaLite and then Colt (after buying the manufacturing rights from ArmaLite) has been discontinued for political reasons. Each manufacturer of AR-15-patterned rifles now has its own moniker for the rifle these days; like Colt s “Match Target”, Bushmaster s “XM15E2″, DPMS s “Panther”, and the hilarious Olympic Arms “PCR” for “Politically Correct Rifle”.

-

ar-15 parts and accessories 2006 June
the Ascot Apartments, and officers armed themselves with AR-15 If you have any question about grips4guns.com pistol grips, go to AR-15 Accessories - Rifle Scopes - Scope Mounts - AR-15 SIGHTS - HARRIS

Pistol Grips, Handgun Grips & Relover and Gun Grips Blog Archive
flashlights - ar-15 Rifle Scopes & Sights Blog Archive GunShowOnTheNet.com . Listing of gun parts suppliers on GunShowOnTheNet.com http://www.fredsm14stocks.com/ grips4guns.com for C&C

ar-15 scope mounts & Scope Rings
ar-15 Rifle Scopes & Sights. Grips4guns Pistol Grips. Pistol grips, Handgun grips, Revolver grips FIBER OPTIC SIGHTS Smith & Wesson Rifle Scopes AK-47 ACCESSORIES

Pistol Grips, Handgun Grips & Relover and Gun Grips Pistol Grips
gun accessories for ar-15 Shooting supplies & accessories Pistol Grips, Revolver Grips and Handgun Grips: grips4guns.com (Night sights and Grips4Guns.com - The Finest Grips for your

Pistol Grips: Mounting Solutions Plus (MSP)
Rifle Scopes, Surefire flashlights, Red dot Sights, fiber optic sight, Aimpoint Comp, Eotech, HARRIS BIPOD, FLASHLIGHTS, Glow Sticks for the AR-15 Check out grips4guns.com Specials page for special

Handgun Grips: Mounting Solutions Plus (MSP)
Rifle Scopes, Surefire flashlights, Red dot Sights, fiber optic sight, Aimpoint Comp, Eotech, HARRIS BIPOD, FLASHLIGHTS, Glow Sticks for the AR-15 Check out grips4guns.com Specials page for special

ar-15 parts and accessories Pistol Grips: MWG Company (Ghillie
If you have any question about grips4guns.com pistol grips, go to grips4guns.com Contact Us page 15 - Magazines - gun grips - 1911 grips - AR-15 Accessories - Rifle Scopes - Scope Mounts - AR-15 SIGHTS

Guns Plus, Firearm Shooting Supplies, Gun Accessories, Link & News
Links for Firearm, Shooting Supplies, Gun Accessories, AR-15 www.grips4guns.com. Grips 4 Guns 90 Rounder Precision Reflex AR-15 Sights AR-15 SCOPE

AR15

In December of 1959, Colt acquired manufacturing and marketing rights to the AR15. In 1962 Colt was able to get the Department of Defense’s Advanced Research Project Agency (ARPA) to test 1,000 weapons in its Vietnam-oriented Project Agile. An enthusiastic report led to more studies from the Department of Defense and the Department of the Army, and despite strong Army opposition, Defense Secretary McNamara ordered 85,000 M16’s for Vietnam, and 19,000 for the Air Force.

However, early reports showed that the M16 was not living up to expectations. These reports, presented to McNamara by the Ordnance Department, showed the M16 having reliability as well as accuracy problems. These reports in turn praised the Ordnance Department’s own M14. While the M14 performed well, it was too heavy for the hot jungles of Southeast Asia, and its ammunition also would not allow more than 50-100 rounds to be carried on patrols, severely limiting its capabilities as an automatic weapon.

Further evaluation of the M14 and M16 was done by an independent agency. It concluded that M14 was not as bad as had been suggested by some, that the AR15 itself was not as good as its proponents had represented it to be. However, they did note that the ” AR15” had greater capability for improvement, and that its small size and weight made it a handier weapon in Vietnam.

The M16 was issued w/o proper training and inadequate cleaning supplies. Combined with the humid jungle of Southeast Asia, this caused problems and the rifle gained a bad reputation. Because tolerances were tighter than in previous military arms, the M16 had to be kept extremely clean. War correspondents filed reports where the M16 was jamming, and many were shown on the evening news. It was reported that our soldiers were being killed by a faulty rifle.

This led to Congressional investigations which turned up two related problems. First, the cleaning issue. As training was provided, supplies issued, and some redesign, M16 performed more reliably. The second issue dealt with the use of ball propellants instead of IMR propellants. Remington had developed the 5.56mm round using one type of powder, but the specification was changed during military contract production to allow an alternate. This powder caused more fouling and increased the rate of fire.

-

Fishing and splashing
1960 Sun - No charges in case of ex-councilman v. white supremacist North Bergen judge rules Turner, Vazquez not guilty A North Bergen new CD, “She Used to Call Me Honey,” features ten original songs that were written by Wallace plus the traditional “Samson and

EMAIL THIS POST
Nation - Or even if it does, that Halliburton’s patron saint won’t intervene on the company’s behalf? Another case underlining the need for an independent, bipartisan commission on war profiteering if we are to ever learn the truth about any of this waste

2005 - The Year in Review, plus Year- End Awards - Part 5
East Side Boxing - Terms of washed up, mentally fragile, and gun shy; have graced the paragraphs of several articles. Maybe some of these statements have some validity. Then again the argument for DaVarryl s capabilities is just as strong. DaVarryl has had

A golf cart battery caused fire at Golf Coast Golf Cars
Herald Tribune - then fought with responding deputies and even tried to grab one officer s gun, a LaMorte also pleaded no contest to two charges in another case, another sexual to be the year we were going to open the new stadium,” team president David Samson

Archives for: December 2005
Cape Cod Today - Not to be out tacked by changing political winds, the law firm hired by Nstar to argue the case for the deal before the DTE, (Robert) Keegan and (Robert) Werlin are heavy political contributors to Governor Mitt Romney and Governor-wannabe Kerry Healy

Laval painter shot dead in home robbery
Montreal Gazette - Laval police will be stationed at Samson and Hotel de Ville Blvds. from 8 a.m. to 5 p described as a muscular English-speaking male who wore a ski mask, carried a gun In each case, he entered though a window and demanded money and jewellery. Laval

Ghillie suit

Snipers and hunters with extreme requirements for camouflage use a ghillie, or yowie suit. The ghillie suit was originally developed by Scottish gamekeepers as a portable hunting blind. The name derives from ghillie, the Scots Gaelic for “boy”, in English especially used to refer to servants assisting in hunting or fishing expeditions. A ghillie dhu is a type of brownie which is supposed to disguise itself in leaves and vegetation.[1]

A US Marine sniper wearing a ghillie suits suits can be constructed in many different ways. Some services make them of rough burlap (hessian) flaps attached to a net poncho. US Army Ghillie suits are often built using a pilot’s flightsuit, battle dress uniform (BDU), or some other one-piece coverall as the base. Ponchos made of durable nylon netting can also be used. Unscented dental floss is used to sew each knot of fishnet to the fabric, in the areas to be camouflaged. A drop of ‘Shoe Goo’ is applied to each knot for strength. The desired jute is applied to the netting by tying groups of 5 to 10 strands of a color to the netting with simple knots, skipping sections to be filled in with other colors. Making a ghillie suit from scratch is time consuming, and a detailed, high-quality suit can take 100 hours to manufacture and season.

A ghillie suits is usually prepared by assembling it, beating it, dragging it behind a car, and then rolling it in cow manure or burying it in mud and then letting it ferment. This makes it very much like wearable humus. A ghillie suit that closely matches the actual terrain of the zone of operation will stand out less, so elements of that general environment (local foliage or other matter) may also be included in the netting.

An inherent problem with ghillie suits is internal (and sometimes, external) temperatures. Even in relatively moderate climates, the temperature inside of the ghillie suit can soar to over 50 C (120 F).

High quality “ghillie suits” can be purchased online, but traditionally, soldiers in the armed forces construct their own unique suits.

-

Lifeboat rescues jetskier twice in day
The Herald, UK - Jul 17, 2006… Last night Shona Robison, the SNP MSP, reiterated her call for compulsory basic training for anyone taking to the water in a jetski and a national register for …

Labour will not veto nuclear - MSP
ic Scotland.co.uk, UK - Jul 3, 2006Dumfries MSP Dr Elaine Murray said the party has no general objection to such developments, ahead of next year’s Holyrood elections. …

MSP visits Buchan Cornerstone service
Buchan Observer,  UK - Jul 4, 2006BANFF and Buchan MSP Stewart Stevenson visited the Peterhead services of leading learning disabilities charity Cornerstone Community Care last week. …

Italy’s Kelyan Lab Chooses Empower’s MSP
Xtvworld (press release), India - Jul 14, 2006Italy, July 14, 2006 (XTVWorld.Com) — Kelyan Lab has chosen Empower’s Messaging Gateway (MSP) for centralised VAS, connectivity and control of third party SMS …

‘No firm will put up prices to satisfy a few environmentalists’
Scotsman, United Kingdom - Jul 18, 2006WITH a majority of only 158 to defend it’s hardly surprising that Liberal Democrat MSP Mike Pringle is pulling out all the stops to raise his profile and see …

Ghillie suit

Snipers and hunters with extreme requirements for camouflage use a ghillie, or yowie suit. The ghillie suit was originally developed by Scottish gamekeepers as a portable hunting blind. The name derives from ghillie, the Scots Gaelic for “boy”, in English especially used to refer to servants assisting in hunting or fishing expeditions. A ghillie dhu is a type of brownie which is supposed to disguise itself in leaves and vegetation.[1]

A US Marine sniper wearing a ghillie suits suits can be constructed in many different ways. Some services make them of rough burlap (hessian) flaps attached to a net poncho. US Army Ghillie suits are often built using a pilot’s flightsuit, battle dress uniform (BDU), or some other one-piece coverall as the base. Ponchos made of durable nylon netting can also be used. Unscented dental floss is used to sew each knot of fishnet to the fabric, in the areas to be camouflaged. A drop of ‘Shoe Goo’ is applied to each knot for strength. The desired jute is applied to the netting by tying groups of 5 to 10 strands of a color to the netting with simple knots, skipping sections to be filled in with other colors. Making a ghillie suit from scratch is time consuming, and a detailed, high-quality suit can take 100 hours to manufacture and season.

A ghillie suits is usually prepared by assembling it, beating it, dragging it behind a car, and then rolling it in cow manure or burying it in mud and then letting it ferment. This makes it very much like wearable humus. A ghillie suit that closely matches the actual terrain of the zone of operation will stand out less, so elements of that general environment (local foliage or other matter) may also be included in the netting.

An inherent problem with ghillie suits is internal (and sometimes, external) temperatures. Even in relatively moderate climates, the temperature inside of the ghillie suit can soar to over 50 C (120 F).

High quality “ghillie suits” can be purchased online, but traditionally, soldiers in the armed forces construct their own unique suits.

-

AR15

In December of 1959, Colt acquired manufacturing and marketing rights to the AR15. In 1962 Colt was able to get the Department of Defense’s Advanced Research Project Agency (ARPA) to test 1,000 weapons in its Vietnam-oriented Project Agile. An enthusiastic report led to more studies from the Department of Defense and the Department of the Army, and despite strong Army opposition, Defense Secretary McNamara ordered 85,000 M16’s for Vietnam, and 19,000 for the Air Force.

However, early reports showed that the M16 was not living up to expectations. These reports, presented to McNamara by the Ordnance Department, showed the M16 having reliability as well as accuracy problems. These reports in turn praised the Ordnance Department’s own M14. While the M14 performed well, it was too heavy for the hot jungles of Southeast Asia, and its ammunition also would not allow more than 50-100 rounds to be carried on patrols, severely limiting its capabilities as an automatic weapon.

Further evaluation of the M14 and M16 was done by an independent agency. It concluded that M14 was not as bad as had been suggested by some, that the AR15 itself was not as good as its proponents had represented it to be. However, they did note that the ” AR15” had greater capability for improvement, and that its small size and weight made it a handier weapon in Vietnam.

The M16 was issued w/o proper training and inadequate cleaning supplies. Combined with the humid jungle of Southeast Asia, this caused problems and the rifle gained a bad reputation. Because tolerances were tighter than in previous military arms, the M16 had to be kept extremely clean. War correspondents filed reports where the M16 was jamming, and many were shown on the evening news. It was reported that our soldiers were being killed by a faulty rifle.

This led to Congressional investigations which turned up two related problems. First, the cleaning issue. As training was provided, supplies issued, and some redesign, M16 performed more reliably. The second issue dealt with the use of ball propellants instead of IMR propellants. Remington had developed the 5.56mm round using one type of powder, but the specification was changed during military contract production to allow an alternate. This powder caused more fouling and increased the rate of fire.

AR15

In December of 1959, Colt acquired manufacturing and marketing rights to the AR15. In 1962 Colt was able to get the Department of Defense’s Advanced Research Project Agency (ARPA) to test 1,000 weapons in its Vietnam-oriented Project Agile. An enthusiastic report led to more studies from the Department of Defense and the Department of the Army, and despite strong Army opposition, Defense Secretary McNamara ordered 85,000 M16’s for Vietnam, and 19,000 for the Air Force.

However, early reports showed that the M16 was not living up to expectations. These reports, presented to McNamara by the Ordnance Department, showed the M16 having reliability as well as accuracy problems. These reports in turn praised the Ordnance Department’s own M14. While the M14 performed well, it was too heavy for the hot jungles of Southeast Asia, and its ammunition also would not allow more than 50-100 rounds to be carried on patrols, severely limiting its capabilities as an automatic weapon.

Further evaluation of the M14 and M16 was done by an independent agency. It concluded that M14 was not as bad as had been suggested by some, that the AR15 itself was not as good as its proponents had represented it to be. However, they did note that the ” AR15” had greater capability for improvement, and that its small size and weight made it a handier weapon in Vietnam.

The M16 was issued w/o proper training and inadequate cleaning supplies. Combined with the humid jungle of Southeast Asia, this caused problems and the rifle gained a bad reputation. Because tolerances were tighter than in previous military arms, the M16 had to be kept extremely clean. War correspondents filed reports where the M16 was jamming, and many were shown on the evening news. It was reported that our soldiers were being killed by a faulty rifle.

This led to Congressional investigations which turned up two related problems. First, the cleaning issue. As training was provided, supplies issued, and some redesign, M16 performed more reliably. The second issue dealt with the use of ball propellants instead of IMR propellants. Remington had developed the 5.56mm round using one type of powder, but the specification was changed during military contract production to allow an alternate. This powder caused more fouling and increased the rate of fire.

-

Brownells - World’s Largest Supplier of Firearm Accessories and Gunsmithing Tools
Brownells.com - A shooting supersite for Gunsmiths, gun parts, firearms and shooters supplies … MPI MTM MUESCHKE MULEY ENT MURRAY’S MWG NATIONAL BOOK NETWORK NATIONAL TARGET NAVIDREX NEAR … WEAPONS ACCESSORIES TARGET SHOOTING, INC. TAURUS TAYLOR FREELANCE TAYLOR’S AND CO. TC …

AR15 Airsoft guns: TAURUS MOUNTS
… FAL, Glock, Smith & Wesson handguns, Pistols and Revolvers & Other … WEIGAND: Taurus Scope Mount for M44, Raging Bull .454 Casull - Silver. WEIGAND: Taurus Scope Mount for M44 …